Home > Single Phase Transformer

Single Phase Transformer

Japanese Standards;

The Insulation Transformers designed according to JIS C5401 and JEC2200, and the input/output is available with terminal block, lead-wore, connector and others.

International Standards (Europe and USA)

The transformers designed according to EN-Standards and EU Low Voltage Directive, Transformers with CE-Marking, Transformers in compliance with the requirements of US/NEC (NFPA70/79) and Transformers with UL-Marking.

e series

Single phase insulation transformer which aims at the smaller size and the lower cost, and it enables to keep the initial cost lower. As the weight of the transformer is kept light, it is possible to reduce the weight of the equipment and the control panel, and also the initial cost.

SLH

Single phase insulation transformer with high reliability, low running cost and low exciting current (low current consumption with no-load), and this is a standard type of our transformers.

Single-phase Insulation Transformers
HEC-UL Series
(In compliance with CE/UL)

This Single-phase insulation transformer is designed in compliance with EN61558 and IEC61558 by European Low Voltage Directive and classified into “Transformer without short-circuit protection circuit” as insulation and safety transformer.

Medical Transformers
WECC-Medical Series
(In compliance with CE/UL/CSA)

This medical transformer is Single-phase Insulation Transformer(with double insulation) designed based on J60742 and IEC61558, and in compliance with IEC601-1 and JIST1001-1 Safety General Regulation for Medical electric devices. The leakage current is is kept less than 100μA.

Single-phase Insulation Transformers
WECA Series
(Compliance with CE/UL/CSA)

This is Single-phase Insulation Transformer designed based on European Low Voltage Directive EN61558 and IEC61558 and classified into “Transformer with double insulation, but without short-circuit protection circuit” as insulation and safety transformer.

Single-phase Insulation Transformers
WECC Series
(Compliance with CE/UL/CSA)

This is Single-phase Insulation Transformer designed based on European Low Voltage Directive EN61558 and IEC61558 and classified into “Transformer with double insulation, but without short-circuit protection circuit” as insulation and safety transformer.

Single-phase Insulation Transformers
WT Series
(Only for Japanese specification)

This transformer is designed based on JEC-2200 (Standard of Japanese Electrotechnical Committee) and according to the Japanese specification. This transformer has the functions of the insulation of single phase circuit and voltage control.

Insulation Transformers
HT Series
(Only for Japanese specification)

This transformer is designed based on JEC-2200 (Standard of Japanese Electrotechnical Committee) and according to the Japanese specification. The technical feature of this transformer is easy cable connection and the increased safety.

Insulation Transformers(Compound winding)
KB/KH Series
(for Japanese specification)

This transformer is designed based on JEC-2200 (Standard of Japanese Electrotechnical Committee) and according to the Japanese specification, and with the bigger capacity from 6kVA to 50kVA.

Control Transformer
CC Series
(for Japanese specification)

This transformer is designed based on JEM1333 (Standard of The Japan Electrical Manufacturers’ Association) and according to the Japanese specification. The new type of the terminal blocks made it possible to connect the wires from both sides of the transformer. Low power consumption, compact and economical type.